What to Look for in Ford Work Trucks

Rain, snow, loose gravel, and quick turns can make it harder to keep your vehicle moving where you intend. Ford AdvanceTrac works behind the scenes to help drivers maintain traction and stability when road conditions become challenging. The system monitors how the vehicle is moving and can respond when it detects wheel slip or a loss of stability. For most drivers, there is nothing extra to activate. AdvanceTrac normally turns on when you start the vehicle. How Does Ford AdvanceTrac Work? AdvanceTrac combines traction control with electronic stability control. If a wheel begins to spin, traction control can reduce engine power or apply braking to help restore grip. If the vehicle starts sliding away from the driver's intended direction, electronic stability control can apply braking to individual wheels and adjust engine power. Models equipped with AdvanceTrac with RSC also include Roll Stability Control. This system monitors vehicle movement and can intervene when it detects conditions that could increase rollover risk. For drivers researching AdvanceTrac by Ford, the key benefit is simple: the system can react much faster than a driver could manually when traction suddenly changes. What Are the Benefits of AdvanceTrac? AdvanceTrac can provide extra confidence during situations such as: Driving on wet or snowy roads Accelerating on slippery pavement Taking curves Making sudden steering corrections Driving on loose surfaces Towing on equipped vehicles Some Ford towing systems also work with AdvanceTrac. For example, Trailer Sway Control can apply individual brakes and reduce engine power when the vehicle detects trailer movement. AdvanceTrac does not replace careful driving or proper tires, but it adds another layer of support when conditions become unpredictable. Which Ford Vehicles Have AdvanceTrac? Ford has offered AdvanceTrac across many cars, trucks, SUVs, and commercial vehicles over the years. Current examples include models such as: Ford Escape Ford Explorer Ford Bronco Sport Select Ford commercial trucks Select Ford Transit models Availability can depend on model year, trim, and configuration. Some current vehicles list AdvanceTrac with RSC as standard equipment, while features working alongside it can differ between trims. Before choosing a vehicle specifically for this technology, check the model's current feature list or ask the team at Bull Valley Ford. Who Should Look for AdvanceTrac? Almost any driver can benefit from electronic stability and traction technology, but it can be especially appealing for people who regularly encounter changing road conditions. Consider AdvanceTrac if you: Drive through Illinois snow and rain Frequently travel on highways Tow trailers Drive on gravel or unpaved roads Want additional traction and stability support Families may also appreciate knowing that the system automatically provides assistance without requiring the driver to constantly adjust settings. What Does "Service AdvanceTrac" Mean? A “Service AdvanceTrac” message can indicate that the vehicle detected a problem with the stability or traction control system. First, check whether you manually turned traction or stability control off. If the warning remains after you restore the normal setting, schedule an inspection. A technician can diagnose the system and determine what caused the warning. Do not ignore a persistent stability control warning because the system may not provide its normal level of assistance. Learn More About AdvanceTrac at Bull Valley Ford AdvanceTrac is one of the technologies Ford uses to help drivers stay confident when road conditions change. The team at Bull Valley Ford can explain which current Ford models include the system and demonstrate other performance and safety features during your test drive. Visit Bull Valley Ford to compare vehicles or speak with our service team if your Ford displays an AdvanceTrac warning.

Handing someone else the keys to your vehicle can feel a little nerve-racking, especially when a new or younger driver is getting behind the wheel. Ford MyKey gives owners a way to encourage safer driving habits by programming certain restrictions into a specific key. Instead of changing how the vehicle works for everyone, Ford MyKeys let an owner keep one admin key while programming another key with selected driving limits. That makes MyKey useful for families with teen drivers or anyone who regularly lets another person use their ride. How Does Ford MyKey Work? The MyKey Ford system recognizes which programmed key starts the vehicle. When someone uses a MyKey, the vehicle automatically activates the restrictions and settings assigned to it. Start the vehicle with an admin key, and those MyKey restrictions do not apply. Depending on the Ford model and model year, MyKey settings can include: A maximum vehicle speed Speed reminder alerts Limits on audio volume Earlier low-fuel or low-charge warnings Seat belt reminders Restrictions on turning off certain safety systems Automatic activation of some parking and driver-assistance features Available settings vary by vehicle, so drivers should check their owner's manual for the exact features their Ford supports. How Do You Set Up Ford MyKey? Creating a MyKey usually takes only a few minutes. You need an admin key and the key you want to program. On many newer Ford vehicles, the process involves placing the key or remote in the designated backup location and using the vehicle's touchscreen. You can then open the vehicle settings, select MyKey, and choose the option to create one. Other Ford models use the instrument cluster display and steering wheel controls instead. Once you create the MyKey, label or separate it from your admin key. That simple step can prevent confusion when different drivers share the same vehicle. Why Would You Use MyKey? MyKey can provide extra reassurance when a less experienced driver takes the vehicle. For example, parents may set a speed reminder so a new driver receives an alert when traveling too fast. Limiting audio volume can also reduce distractions. Some safety systems remain active while the MyKey is in use, encouraging the driver to rely on the vehicle's built-in safety technology. MyKey does not replace good driving habits or conversations about road safety. Instead, it gives owners another tool for encouraging responsible behavior. Ford MyKey FAQs Can I Change MyKey Settings Later? Yes. An admin key can change configurable MyKey settings. The exact options available depend on the vehicle. If you recently created the MyKey, some vehicles allow you to adjust or clear settings during the same key cycle. Once you turn the vehicle off, you will generally need an admin key to make additional changes. How Do I Deactivate MyKey on a Ford? Drivers searching for how to deactivate MyKey Ford settings will usually need to clear the programmed MyKeys with an admin key. On many newer models, start the vehicle with the admin key and go to: Settings > Vehicle Settings > MyKey > Clear All MyKeys Confirm your selection when prompted. Some older Ford vehicles use the instrument cluster instead of the touchscreen. Consult your owner's manual before starting because the steps can differ. What Happens During a Ford MyKey Reset? A Ford MyKey reset clears the MyKey restrictions and returns the programmed keys to normal admin-key status. Ford refers to this process as clearing all MyKeys. After you complete it, the previous limits no longer apply when you use those keys. Can I Reset Only One MyKey? Ford typically applies the same MyKey settings to all programmed MyKeys. Clearing the system generally clears all MyKeys at the same time rather than removing restrictions from only one key. What Is an Admin Key? An admin key is a key that has not been programmed as a MyKey. The admin key can create MyKeys, adjust configurable settings, and clear MyKey restrictions. Keep at least one admin key separate from the MyKey you give another driver. What If I Do Not Have an Admin Key? If you cannot access the option to clear MyKey, first make sure you are starting the vehicle with an admin key. Ford lists using a MyKey instead of an admin key as one reason drivers may be unable to clear the system. If you lost your admin key or cannot determine which key is the administrator, contact a Ford dealership for assistance rather than trying to bypass the system. Does MyKey Work the Same on Every Ford? No. MyKey availability, setup procedures, and configurable restrictions can vary by model and model year. The owner's manual for your specific vehicle provides the most accurate instructions. A Ford service team can also help you understand which MyKey features your vehicle supports. Get Help With Ford MyKey at Bull Valley Ford Ford MyKey can make sharing your vehicle easier by giving you more control over the settings another driver uses. Whether you need help creating a MyKey, changing its restrictions, or completing a Ford MyKey reset, the team at Bull Valley Ford can help you understand your vehicle's features. Visit Bull Valley Ford to learn more about MyKey and other Ford technology designed to make everyday driving simpler and more convenient.

What to Do About Streaky Windshield Wipers Clear visibility matters every time you drive. Rain, snow, road spray, and dirt can quickly make the windshield difficult to see through. When streaky windshield wipers leave lines or smears behind, they can reduce visibility and make driving less comfortable. The problem does not always mean you need new blades right away. Dirt, dust, or residue may prevent the rubber from making even contact with the glass. Cleaning the blades may solve the issue, but worn or damaged blades usually need replacement. Here is how to inspect, clean, and replace your windshield wipers. Clean the Wiper Blades First Before replacing the blades, check them for dirt or buildup. Dust, road grime, pollen, and car wash residue can collect along the rubber edge. This debris can cause the blades to skip or leave streaks. Lift each wiper arm away from the windshield. Wipe the rubber edge with a clean cloth and warm, soapy water. You can also use rubbing alcohol on a cloth to remove stubborn residue. Run the cloth along the full length of each blade. Continue cleaning until the cloth no longer picks up dirt. Then wipe the windshield with automotive glass cleaner. After cleaning, test the wipers with washer fluid. If they move smoothly and clear the glass evenly, you may not need to replace them yet. Check for Signs of Damage Cleaning will not fix rubber that has cracked, split, hardened, or changed shape. Inspect the blades closely after removing any dirt. You may need new wiper blades if you notice: Cracks or cuts in the rubber Missing pieces along the blade edge Bent or damaged frames Chattering across the windshield Areas the blades fail to clear Loud squeaking during use Sunlight, temperature changes, ice, and regular use can wear down the rubber. Blades may also lose flexibility over time, even when they still look intact. Replace the blades if cleaning does not improve performance or if you find visible damage. When Should You Replace Wiper Blades? Many drivers replace windshield wipers every six to twelve months. However, weather and driving conditions can affect how long they last. Frequent sun exposure can dry out the rubber. Winter ice can tear the blade edge or place pressure on the frame. Heavy rain and regular highway driving may also shorten blade life. You should check your wipers during routine vehicle maintenance. Replace them as soon as they stop clearing the windshield properly. Waiting can make it harder to see during bad weather. How to Replace Windshield Wipers Learning how to replace wiper blades can help you complete a simple maintenance task at home. The exact connection may vary by vehicle, so check your owner's manual before starting. Follow these general steps: Buy blades that match your vehicle's required size. Lift the wiper arm away from the windshield. Turn the old blade so you can access the attachment point. Press the release tab or open the locking clip. Slide the old blade off the wiper arm. Attach the new blade and listen for it to click into place. Lower the arm gently onto the windshield. Repeat the process on the other side. Place a folded towel on the windshield while working. This can help protect the glass if the metal wiper arm falls unexpectedly. Test the new blades with washer fluid after installation. Confirm that they move freely and clear the windshield without leaving streaks. Do Not Forget the Rear Wiper SUVs, crossovers, and hatchbacks often have a rear windshield wiper. Drivers sometimes overlook this blade until visibility becomes poor. Inspect and clean the rear blade when you check the front wipers. Replace it if the rubber feels hard, looks damaged, or leaves part of the rear glass covered. Keep Your View Clear Streaking does not always mean your windshield wipers have reached the end of their service life. Cleaning the blades and windshield may remove the dirt causing the problem. However, cracked, bent, or hardened blades need replacement. Bull Valley Ford can help you find the correct wiper blades for your vehicle and keep up with other important maintenance needs. Visit our service department in Woodstock, IL, schedule an appointment online, or call (815) 338-6680 today. What to Do About Streaky Windshield Wipers Clear visibility matters every time you drive. Rain, snow, road spray, and dirt can quickly make the windshield difficult to see through. When streaky windshield wipers leave lines or smears behind, they can reduce visibility and make driving less comfortable. The problem does not always mean you need new blades right away. Dirt, dust, or residue may prevent the rubber from making even contact with the glass. Cleaning the blades may solve the issue, but worn or damaged blades usually need replacement. Here is how to inspect, clean, and replace your windshield wipers. Clean the Wiper Blades First Before replacing the blades, check them for dirt or buildup. Dust, road grime, pollen, and car wash residue can collect along the rubber edge. This debris can cause the blades to skip or leave streaks. Lift each wiper arm away from the windshield. Wipe the rubber edge with a clean cloth and warm, soapy water. You can also use rubbing alcohol on a cloth to remove stubborn residue. Run the cloth along the full length of each blade. Continue cleaning until the cloth no longer picks up dirt. Then wipe the windshield with automotive glass cleaner. After cleaning, test the wipers with washer fluid. If they move smoothly and clear the glass evenly, you may not need to replace them yet. Check for Signs of Damage Cleaning will not fix rubber that has cracked, split, hardened, or changed shape. Inspect the blades closely after removing any dirt. You may need new wiper blades if you notice: Cracks or cuts in the rubber Missing pieces along the blade edge Bent or damaged frames Chattering across the windshield Areas the blades fail to clear Loud squeaking during use Sunlight, temperature changes, ice, and regular use can wear down the rubber. Blades may also lose flexibility over time, even when they still look intact. Replace the blades if cleaning does not improve performance or if you find visible damage. When Should You Replace Wiper Blades? Many drivers replace windshield wipers every six to twelve months. However, weather and driving conditions can affect how long they last. Frequent sun exposure can dry out the rubber. Winter ice can tear the blade edge or place pressure on the frame. Heavy rain and regular highway driving may also shorten blade life. You should check your wipers during routine vehicle maintenance. Replace them as soon as they stop clearing the windshield properly. Waiting can make it harder to see during bad weather. How to Replace Windshield Wipers Learning how to replace wiper blades can help you complete a simple maintenance task at home. The exact connection may vary by vehicle, so check your owner's manual before starting. Follow these general steps: Buy blades that match your vehicle's required size. Lift the wiper arm away from the windshield. Turn the old blade so you can access the attachment point. Press the release tab or open the locking clip. Slide the old blade off the wiper arm. Attach the new blade and listen for it to click into place. Lower the arm gently onto the windshield. Repeat the process on the other side. Place a folded towel on the windshield while working. This can help protect the glass if the metal wiper arm falls unexpectedly. Test the new blades with washer fluid after installation. Confirm that they move freely and clear the windshield without leaving streaks. Do Not Forget the Rear Wiper SUVs, crossovers, and hatchbacks often have a rear windshield wiper. Drivers sometimes overlook this blade until visibility becomes poor. Inspect and clean the rear blade when you check the front wipers. Replace it if the rubber feels hard, looks damaged, or leaves part of the rear glass covered. Keep Your View Clear Streaking does not always mean your windshield wipers have reached the end of their service life. Cleaning the blades and windshield may remove the dirt causing the problem. However, cracked, bent, or hardened blades need replacement. Bull Valley Ford can help you find the correct wiper blades for your vehicle and keep up with other important maintenance needs. Visit our service department in Woodstock, IL, schedule an appointment online, or call (815) 338-6680 today.